BIXOLON SLP-T400II Manual de usuario descargar pdf (Pagina 20)

Rev. 1.00

- 20 -

SLP-T400IIx/T403IIx

4. Self-Test

The self-test checks whether the printer has any problems.

- Firmware version, printer configuration information, printing quality checking pattern,

and peripheral configuration information, etc.

Users cannot perform this procedure if using the printer’s label peel-off option.

If the printer does not function properly, contact an authorized dealer.

The self-test checks the following;

1) Make sure that the paper roll has been installed properly.

2) Turn on the power while holding down the FEED button. The self-test begins.

3) Turn on the power while depressing the feed button then self-test will begin.

(Hold the button for about five seconds)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sin comentarios

BIXOLON SLP-T400II Manual de usuario Pagina 20