BIXOLON SLP-T400II Manual de usuario descargar pdf (Pagina 22)

Rev. 1.00

- 22 -

SLP-T400IIx/T403IIx

5-2 Stand-alone Configuration Mode

Various modes can be executed using buttons and LED only.

5-2-1 How to start stand-alone configuration mode

• The printer mode is set to Printer Setting Mode when the Pause button is depressed

for two seconds while in Print Standby Mode.

• Both LEDs change to orange color and a short buzzer sound will be produced, and the

printer enters into this mode.

• When the printer enters into this mode, the status of LED 1 and LED 2 are changed

sequentially.

• When the Feed button is depressed at specific LED color combination, the

corresponding printer operation will be selected.

5-2-2 List of supported functions

Sequence

number

LED 1 LED 2

Printer operation

Color Status Color Status

Green On

Green Blink four times Configuration Printing

2 Orange Blink four times Factory Reset

3 Red Blink four times Data Dump Mode

Orange On

Green Blink four times Auto Calibration Mode 2

5 Orange Blink four times -

6 Red Blink four times -

Red On

Green Blink four times -

8 Orange Blink four times -

9 Red Blink four times -

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Sin comentarios

BIXOLON SLP-T400II Manual de usuario Pagina 22