BIXOLON SRP-352plusA&C Manual de usuario descargar pdf (Pagina 18)

Rev. 1.03

- 18 -

SRP-350/352plusA&C

Bit Off/On Hex Decimal Function

Off 00 0 Paper roll end sensor disable. 0

On 01 1 Paper roll end sensor enable.

Off 00 0 Paper roll end sensor disable. 1

On 02 2 Paper roll end sensor enable.

2~7 - - - Reserved.

ESC c 5 n

[Name]

[Format]

[Range]

[Default]

[Description]

[Notes]

Enable / Disable panel button.

ASCII ESC c 5 n

Hex 1B 63 35 n

Decimal 27 99 53 n

0 ≤ n ≤ 255

n=0

▪ Enables or disables the panel buttons.

- When the LSB of n is 0, the panel buttons are enabled.

- When the LSB of n is 1, the panel buttons are disabled.

▪ When the printer cover is open, the panel buttons are always ignored

regardless of the setting with this command.

ESC d n

[Name]

[Format]

[Range]

[Description]

Print and feed n lines.

ASCII ESC d n

Hex 1B 64 n

Decimal 27 100 n

0 ≤ n ≤ 255

▪ Prints the data in the print buffer and feeds n lines.

ESC p m t1 t2

[Name]

[Format]

[Range]

[Description]

Generate pulse.

ASCII ESC p m t1 t2

Hex 1B 70 m t1 t2

Decimal 27 112 m t1 t2

m = 0, 1, 48, 49

0 ≤ t1 ≤ 255, 0 ≤ t2 ≤ 255

▪ Outputs the pulse specified by t1 and t2 to connector pin m as follows :

m Connector pin

0, 48 Drawer kick-out connector pin 2

1, 49 Drawer kick-out connector pin 5

▪ t1 specifies the pulse ON time as [t1 x 2ms], and t2 specifies the pulse

OFF time as [t2 x 2ms].

▪ If t2 is smaller than t1, OFF time is set as [t1 x 2ms].

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 53 54

Comentarios a estos manuales

Sin comentarios

BIXOLON SRP-352plusA&C Manual de usuario Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo BIXOLON SRP-352plusA&C