BIXOLON SRP-352plusA&C Manual de usuario descargar pdf (Pagina 8)

Rev. 1.03

- 8 -

SRP-350/352plusA&C

DLE DC4 fn m t (fn=1)

[Name]

[Format]

[Range]

[Description]

Generate pulse in real-time.

ASCII DLE DC4 fn m t

Hex 10 14 1 m t

Decimal 16 20 1 m t

fn=1

0 ≤ m ≤ 8

1 ≤ t ≤ 8

▪ Outputs the pulse specified by t in real-time to the connector pin specified

by m as follows :

n Connector pin

0 Drawer kick-out connector pin 2.

1 Drawer kick-out connector pin 5.

- The pulse ON time or OFF time is set to [t x 100 ms].

▪ Specify n=1 or 2 after removing the cause of the error.

▪ If print data includes a character string with this command, the printer

performs the command. User must consider this.

- For example : Bit image data accidentally might include a data string

with this command.

▪ Do not embed this command within another command.

- For example : Bit image data might include this command.

▪ This command is ignored in the following states :

- During transmission of block data.

- During driving of drawer kick-out.

- When an error has occurred.

DLE DC4 fn a b (fn=2)

[Name]

[Format]

[Range]

[Description]

Execute power-off sequence.

ASCII DLE DC4 fn a b

Hex 10 14 fn a b

Decimal 16 20 fn a b

fn=2

a=1

b=8

▪ Executes the printer power-off sequence.

- Stores the values of the maintenance counter.

- Transmits the following power-off status (Header + Status + NUL).

Power off status Hex Decimal Amount of data

Header 3B H 59 1 byte

Status 30 H 48 1 byte

NUL 00 H 0 1 byte

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 53 54

Comentarios a estos manuales

Sin comentarios

BIXOLON SRP-352plusA&C Manual de usuario Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Impresión y escaneo BIXOLON SRP-352plusA&C