
Rev. 1.03
- 9 -
SRP-350/352plusA&C
[Notes] - Executes the printer power off.
▪ If this command is encountered, the printer will not continue to process
anything. To recover the printer to print again, it is necessary to turn the
power on again or execute a hardware reset.
▪ If print data includes a character string with this command, the printer
performs the command. User must consider this.
- For example : Bit image data accidentally might include a data string
with this command.
▪ Do not embed this command within another command.
- For example : Bit image data might include this command.
▪ This command is ignored block data is transmitted.
DLE DC4 fn d1...d7 (fn=8)
[Name]
[Format]
[Range]
[Description]
Clear buffer(s).
ASCII DLE DC4 fn d1...d7
Hex 10 14 8 d1...d7
Decimal 16 20 8 d1...d7
fn=8
d1=1, d2=3, d3=20, d4=1, d5=6, d6=2, d7=8
▪ Clear all data stored in the receive buffer and the print buffer.
▪ Transmits the following three bytes data.
Hex Decimal Amount of data
Header 37 H 55 1 byte
Flag 25 H 37 1 byte
NUL 00 H 0 1 byte
[Notes] ▪ Enters standard mode.
▪ The command must be inhibited for use in a system using this printer and
the EPSON OPOS.
▪ If print data includes a character string with this command, the printer
performs the command. User must consider this.
- For example : Bit image data accidentally might include a data string
with this command.
▪ Do not embed this command within another command.
- For example : Bit image data might include this command.
▪ This command is ignored block data is transmitted.
ESC FF
[Name]
[Format]
[Description]
Print data in page mode.
ASCII ESC FF
Hex 1B 0C
Decimal 27 12
▪ In page mode, prints all buffered data in the printing area collectively.
Comentarios a estos manuales