BIXOLON SPP-R300 Especificaciones descargar pdf (Pagina 134)

SPP-R300 Command Manual

Rev. 1.00 BIXOLON

- 134 -

GS v 0

Function: Print raster bit image

Code:

ASCII

GS v 0 m xL xH yL yH d1...dk

Hex

1D 76 30 m xL xH yL yH d1...dk

Decimal

29 118 48 m xL xH yL yH d1...dk

Range:

0 ≤ m ≤ 3, 48 ≤ m ≤ 51

1 ≤ (xL + xH x 256) ≤ 576 (0 ≤ xL ≤ 64, xh=2)

1 ≤ (yL + yH x 256) ≤ 1662 (0 ≤ yL ≤ 126, 0 ≤ yH ≤ 6)

0 ≤ d ≤ 255

1≤ k ≤ 119664

Default:

None

Description:

■

This command prints a raster bit image according to the mode defined by m.

DPI : Dots per Inch (25.4mm)

m Mode Vertical dot density (DPI) Horizontal dot density (DPI)

0, 48 Normal 203 203

1, 49 Double-width 203 203/2

2, 50 Double-height 203/2 203

3, 51 Quadruple 203/2 203/2

• xL, xH specifies (xL + xH x 256) byte(s) in the horizontal direction for the bit image.

• yL, yH specifies (yL + yH x 256) dot(s) in the vertical direction for the bit image.

• d specifies the definition data of the bit image data.

Remarks:

■ In standard mode, this command is effective when the printer buffer is empty and the printer is in the beginning of the

line. If the buffer is not empty, after processing m, the printer treats the following data as normal data.

■ In page mode, the bit image is stored in the print buffer, not being printed.

■ None of the print modes such as emphasized, double-strike, etc, affects the printing of the bit image.

■ The default dot density set by GS L is applied to printing of the bit image.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 148 149

Sin comentarios

BIXOLON SPP-R300 Especificaciones Pagina 134