BIXOLON SPP-R300 Especificaciones descargar pdf (Pagina 37)

SPP-R300 Command Manual

Rev. 1.00 BIXOLON

- 37 -

ESC T

Function: Select print direction in page mode

Code:

ASCII

ESC T n

Hex

1B 54 n

Decimal

27 84 n

Range:

0 ≤ n ≤ 3, 48 ≤ n ≤ 51

Default:

n = 0

Description:

This command selects the print direction and starting position in page mode.

n Print Direction Starting Position

0,48 Left right Upper left

1,49 Bottom to top Lower left

2,50 Right left Lower right

3,51 Top bottom Upper right

Remarks:

■ The print direction set by this command id not effective in standard mode.

■ If this command is processed in standard mode, the setting by this command is effective when the printer changes to

page mode.

■ Depending on the print starting position set by this command, the horizontal motion unit or vertical motion unit is used

for the following commands.

• When the starting position is the upper left or lower right of the print area; ESC SP, ESC $, ESC \ use the horizontal

motion unit and ESC 3, ESC J, GS $, GS \ the vertical motion unit.

• When the starting position is the upper right or lower left of the print area; ; ESC SP, ESC $, ESC \ use the vertical

motion unit and ESC 3, ESC J, GS $, GS \ the horizontal motion unit.

■ The setting of this command remains effective until ESC !, ESC @, printer reset or power cycling is executed.

Differences:

None

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 148 149

Sin comentarios

BIXOLON SPP-R300 Especificaciones Pagina 37