BIXOLON SRP-F312 Especificaciones descargar pdf (Pagina 129)

SRP-F310/312

Rev. 1.00 BIXOLON

- 129 -

GS v 0

Function: Print raster bit image

Code:

ASCII

GS v 0 m xL xH yL yH d1...dk

Hex

1D 76 30 m xL xH yL yH d1...dk

Decimal

29 118 48 m xL xH yL yH d1...dk

Range:

0 ≤ m ≤ 3, 48 ≤ m ≤ 51

1 ≤ (xL + xH x 256) ≤ 128 (0 ≤ xL ≤ 128, xh=0)

1 ≤ (yL + yH x 256) ≤ 4095 (0 ≤ yL ≤ 255, 0 ≤ yH ≤ 15)

0 ≤ d ≤ 255

k = (xL + xH x 256) x (yL + yH x 256)

Default:

None

Description:

■ This command prints a raster bit image according to the mode defined by m.

DPI : Dots per Inch (25.4mm)

m Mode Vertical dot density (DPI) Horizontal dot density (DPI)

0, 48 Normal 180 180

1, 49 Double-width 180 90

2, 50 Double-height 90 180

3, 51 Quadruple 90 90

• xL, xH specifies (xL + xH x 256) byte(s) in the horizontal direction for the bit image.

• yL, yH specifies (yL + yH x 256) dot(s) in the vertical direction for the bit image.

• d specifies the definition data of the bit image data.

Remarks:

■ In standard mode, this command is effective when the printer buffer is empty and the printer is in the beginning of the

line. If the buffer is not empty, after processing m, the printer treats the following data as normal data.

■ In page mode, the bit image is stored in the print buffer, not being printed.

■ None of the print modes such as emphasized, double-strike, etc, affects the printing of the bit image.

■ The default dot density set by GS L is applied to printing of the bit image.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 144 145

Sin comentarios

BIXOLON SRP-F312 Especificaciones Pagina 129